Additions to existing entities

Targeting

• You can target parent of specified entity by adding @p@. @p@!activator would target parent of the activator entity
• You can target children of specified entity by adding @c@ prefix. @c@!activator would target children of the activator entity
• Target all entities in a box by adding @bbxmin ymin zmin xmax ymax zmax@ prefix. @bb-100 -100 -100 100 100 100@prop_dynamic would target prop_dynamic entities inside -100 -100 -100 100 100 100 box
• Target entities matching the filter by adding @f@ prefix. @f@filtername@entityname would target all entityname that pass the filtername filter
• Target entity from datamap/sendprop by adding @e@ prefix. @e@m_hOwnerEntity@!activator would target the owner entity of !activator

Various

• You can execute an input immediately rather than with at least 1 tick delay by setting input delay to -1. This allows you to access !activator of $OnKilled entity

Expressions

Expressions can be used to calculate input parameters without the need of extra logic entities

point_viewcontrol

Inputs

• $EnableAll
  • Enable the camera for all players on the map. Spawnflag [512] may not work properly. (Start At Player, Interruptable by Player)
• $DisableAll
  • Disable the camera for all players on the map
• $SetTarget <entity>
  • Set current target to entity

Sentry Gun (obj_sentrygun)

Spawnflags

• [64] - Spawn as mini-sentry

Weapon Mimic (tf_point_weapon_mimic)

• Fired projectiles can have their team assigned with teamnum keyvalue (2 for RED and 3 for BLU). Previously all fired projectiles always belonged to the BLU team
• If the player owner is set with $SetOwner or $InheritOwner, fired projectiles are assigned to the owner
• Fired stickybombs are automatically removed if the mimic is removed
• Added projectile type 4 - Bullet. SpeedMax keyvalue determines max distance (infinite if not specified). SplashRadius determines knockback force

Keyvalues

• $preventshootparent <1/0>
  • If set, bullets fired from the mimic cannot hit the parent entity
• $dmgtype <int>
  • Set custom damage type
• $killicon <string>
  • Set custom kill icon

Outputs

• $OnFire
  • Called when the projectile is being fired, with the projectile as !activator

Spawnflags

• [4] - Fire "OnUser4" output when projectile is fired, with the projectile as !activator.

Tank (tank_boss)

• When tank starts deploying, and there is at least one PointTemplate assigned to it, "OnUser4" output is activated

Outputs

• $OnStartDeploy
  • Fired when the tank is deploying the bomb

Medic shield (entity_medigun_shield)

Spawnflags

• [1] - Don't expire and don't block LOS
• [2] - Use the LV2 Shield model

logic_case

Text formatter

With the use of the added inputs, logic_case can be transformed into a text formatter, replacing % in the format string into format parameters.

Example point template usage:

Formatter
{
	OnSpawnOutput
	{
		Target "formattest"
		Action "$Format"
		Delay 1
	}
	logic_case
	{
		"targetname" "formattest"
		"case16" "You have % out of % coins left. % %% done" // Formatter string
		"case01" "6" //First argument
		"case02" "12" //Second argument
		"case03" "50" //Third argument
		"ondefault" "player,$DisplayTextCenter,,0,-1"
	}
}

This would display "You have 6 out of 12 coins left. 50 % done" to all players

Menu

You can use $DisplayMenu input to display a menu for the player, up to 15 entries

Menu
{
	OnSpawnOutput
	{
		Target "menutest"
		Action "$DisplayMenu"
		Delay 1
		Param "player"
	}
	logic_case
	{
		"targetname" "menutest"
		"case16" "Menu title|30|Cancel" // Title, menu duration (0 for infinite), display optional cancel button
		"case01" "option1" //First argument
		"case02" "!disabled option" //Second argument, disabled
		"case03" "suicide" //Third argument
		"oncase03" "!activator,sethealth,0,0,-1" // Selected 3rd option
		"ondefault" "player,$DisplayTextCenter,he,0,-1" // No option selected
	}
}

Inputs

• $FormatString <string>
  • Sets formatting string, then fires OnDefault output, with formatted string as parameter
• $FormatStringNoFire <string>
  • Sets formatting string
• $FormatInput1 <string>
  • Sets formatting input argument 1, then fires OnDefault output, with formatted string as parameter
• $FormatInput2-15 <string>
  • Sets formatting input argument 2-15, then fires OnDefault output, with formatted string as parameter
• $FormatInputNoFire1 <string>
  • Sets formatting input argument 1
• $Format
  • Fires OnDefault output, with formatted string as parameter
• $TestSigsegv
  • Fires OnUser1 output. Can be used to test if sigsegv extension is active
• $ToInt <any>
  • Fires OnDefault output, converts parameter value from string/float to integer
• $ToFloat <any>
  • Fires OnDefault output, converts value from string/int to real number
• $CallerToActivator <any>
  • Fires OnDefault output, but the !caller entity is converted to !activator
• $GetKeyValueFromActivator <string>
  • Fires OnDefault output, the key value from the !activator entity is the parameter
• $GetConVar <string>
  • Fires OnDefault output, the convar (console variable) number value is the parameter
• $GetConVarString <string>
  • Fires OnDefault output, the convar (console variable) string value is the parameter
• $DisplayMenu <entity>
  • Display menu at player
• $HideMenu <entity>
  • Hide menu at player

tf_gamerules

Inputs

• $StopVO <string>
  • Stops sound that was started with PlayVO input

• $StopVORed <string>
  • Stops sound that was started with PlayVORed input

• $StopVOBlue <string>
  • Stops sound that was started with PlayVOBlue input
• $SetBossHealthPercentage <float>
  • Set Halloween boss bar percentage to a value between 0 and 1. 0 hides the health bar, any other value makes the bar appear
• $SetBossState <int>
  • If set to 1, makes the health bar green, like if Merasmus is hiding. If set to 0, the bar goes back to normal
• $AddCurrencyGlobal <int>
  • Add currency to all players

player

Inputs

• $AllowClassAnimations <0|1>
  • Allow class animations instead of using refpose when UseCustomModel input is fired to change player model
• $SwitchClass <string>
  • Switch player class. The parameter can be either a class name (heavyweapons for example), or class index
• $SwitchClassInPlace <string>
  • Switch player class in current position. The parameter can be either a class name (heavyweapons for example), or class index
• $ForceRespawn
  • The player instantly respawns
• $ForceRespawnDead
  • The player instantly respawns, but only if they are dead
• $DisplayTextCenter <string>
  • Display text in the middle of the screen
• $DisplayTextChat <string>
  • Display text to the player's chat
• $DisplayTextHint <string>
  • Display yellow text in the bottom part of the screen and play a sound cue
• $Suicide
  • Kill the player
• $ChangeAttributes <string>
  • If the player is a bot, this can be used to change active EventChangeAttributes
• $RollCommonSpell
  • Roll common spell
• $SetSpell <string>
  • Set player current spell to one of the following:
    • Fireball
    • Ball O' Bats
    • Healing Aura
    • Pumpkin MIRV
    • Superjump
    • Invisibility
    • Teleport
    • Tesla Bolt
    • Minify
    • Meteor Shower
    • Summon Monoculus
    • Summon Skeletons
• $AddSpell <string>
  • Adds spell to the number of spells. If the spell is different than the current one, it replaces the spell. The parameter is the same as in $SetSpell
• $AddCond <int> [int]
  • Add condition to player. If a second argument is present, the condition will only run for a specified duration
• $RemoveCond <int>
  • Remove condition from player
• $AddPlayerAttribute <string>
  • Add attribute to player, the parameter should be passed in this way: attribute|value. Example: "move speed bonus|1.2"
• $RemovePlayerAttribute <string>
  • Remove attribute from player. Example: "move speed bonus"
• $GetPlayerAttribute <string>
  • Sends attribute from player as the parameter.
  • parameter format: attribute|entity|input|default value
  • example: fire rate bonus|!activator|$DisplayTextChat|0
• $AddItemAttribute <string>
  • Add attribute to item in slot, the parameter should be passed in this way: attribute|value|slot or item name. Example "damage bonus|2|0" adds 100% damage bonus to primary weapon, "damage penalty|0.5" adds 50% damage penalty to active weapon
• $RemoveItemAttribute <string>
  • Remove attribute from item in slot, the parameter should be passed in this way: attribute|slot or item name. Example "damage bonus" removes damage bonus from primary weapon, "damage penalty" removes damage penalty from active weapon
• $GetItemAttribute <string>
  • Sends item attribute value as the parameter.
  • parameter format: slot or item name|attribute|entity|input|default value
  • example to grab primary slot item's fire rate bonus value: 0|fire rate bonus|!activator|$DisplayTextChat|0
  • You can also type -1 for active weapon or the item name.
• $PlaySoundToSelf <string>
  • Play sound to the player
• $IgnitePlayerDuration <float>
  • Ignite the player for a specified duration in seconds
• $WeaponSwitchSlot <int>
  • Forcibly switches to weapon in slot
• $WeaponStripSlot <int>
  • Removes weapon from a slot (-1 = current slot)
• $GiveItem <string>
  • Gives an item to the player
• $AddCurrency <int>
  • Add currency to the player
• $RemoveCurrency <int>
  • Remove currency from the player
• $SetCurrency <int>
  • Set currency to specified value
• $CurrencyOutputX <string>
  • Fires input if player currency is above specified value (the X in input name), the attribute should be passed in this way: target,input,parameter.
• $CurrencyInvertOutputX<string>
  • Fires input if player currency is below specified value(the X in input name), the attribute should be passed in this way: target,input,parameter
• $DropItem <int>
  • Drop item in slot (-1 = current slot)
• $RemoveItem <string>
  • Remove item with a name
• $Regenerate
  • Regenerate the player, as if touching resupply cabinet
• $RefillAmmo
  • Restore player ammo
• $PlaySequence <string>
  • Play animation sequence with specified name
• $ResetInventory
  • Reset loadout items, as if touching the resupply cabinet
• $BotCommand <string>
  • Forces the bot to perform an action. Examples:
    • interrupt_action -posent targetmove -lookposent targetlook -duration 10 -waituntildone -ondoneattributes AfterDone
      • Move to entity targetmove, while looking at entity targetlook. Wait 10 seconds after moving to the target entity, then ChangeAttributes to AfterDone
    • interrupt_action -posent targetkill -lookposent targetkill -killlook
      • Move to entity targetkill and try to destroy it
    • interrupt_action -pos 0 0 0 -lookpos 100 100 100
      • Move to position 0 0 0 while looking at position 100 100 100
    • despawn
      • Forces to bot to despawn
    • taunt
      • Forces the bot to taunt
    • cloak
      • Forces the spy bot to cloak
    • uncloak
      • Forces the spy bot to uncloak
    • disguise
      • Forces the spy bot to disguise as something
    • build sentry at nearest sentry hint

trigger_hurt

If entity owner is set with $SetOwner or $InheritOwner, the owner will become the damage inflictor

Filter entities

The server will no longer crash if the activator entity got removed the time TestActivator is called

Inputs

• $TestEntity <entity>
  • Test any entity, rather than only the !activator

Trigger entities

The server will no longer crash if the caller entity got removed the time StartTouch or EndTouch is called

Inputs

• $StartTouchEntity <entity>
  • StartTouch any entity, rather than only the !caller
• $EndTouchEntity <entity>
  • EndTouch any entity, rather than only the !caller

game_ui

The server will no longer crash if the player using the entity disconnected from the server

All entities

Keyvalues

• $modules <string>
  • Comma separated list of modules to attach to the entity

Inputs

• $FireUserAsActivator1-4 <string>
  • Acts like FireUser1-4, but the entity becomes the !activator, and the parameter is passed in OnUser1-4 output
• $FireUser5-8 <string>
  • Fires custom $onuser5-8 output
• $TakeDamage <int>
  • Take specified amount of damage. Does not support negative values.
• $TakeDamageFromActivator <int>
  • Take specified amount of damage, the !activator is the damage inflictor
• $SetModel <string>
  • Set custom model
• $SetModelOverride <string>
  • Set custom model, only changes the appearence
• $SetModelSpecial <string>
  • Set custom model, in a special way, it does less additional changes to the entity
• $SetOwner <entity>
  • Set entity owner
• $InheritOwner <entity>
  • Set entity owner to the passed entity owner
• $InheritParent <entity>
  • Set entity parent to the passed entity parent
• $GetKeyValue <string>
  • Fire OnUser1 output, with key value as a parameter
• $MoveType <int>,<int>
  • Set move type
• $PlaySound <string>
  • Play sound from this entity
• $StopSound <string>
  • Stop playing sound from this entity
• $SetLocalOrigin <vector>
  • Set origin relative to parent
• $SetLocalAngles <vector>
  • Set angles relative to parent
• $SetLocalVelocity <vector>
  • Set velocity relative to parent
• $TeleportToEntity <entity>
  • Teleport to specified entity
• $MoveRelative <vector>
  • Move relative to parent (world)
• $RotateRelative <vector>
  • Rotate relative to parent (world)
• $GetEntIndex <string>
  • parameter format: entity|input
  • example: !activator|$DisplayTextCenter
  • Triggers the input of an entity, with entity index as parameter
• $RemoveOutput <string>
  • remove outputs with given name
• $CancelPending
  • Remove all pending inputs this entity is going to fire
• $SetForwardVelocity <float>
  • Set forward velocity of an entity, does not work on every entity
• $FaceEntity <entity>
  • Rotate the entity so that it faces the target entity
• $SetKey$(keyvalue name) <string>
  • Set keyvalue to specified value
• $GetKey$(keyvalue name) <string>
  • parameter format: entity|input|default value
  • example: !activator|$DisplayTextCenter|def
  • Trigger the input of an entity, with keyvalue as a paramer (default value if not found)
• $SetVar$(variable name) <string>
  • Set custom entity variable
• $GetVar$(variable name) <string>
  • parameter format: entity|input|default value
  • example: !activator|$DisplayTextCenter|def
  • Trigger the input of an entity, with variable as a paramer (default value if not found)
• $SetData$(datamap prop name) <string>
  • Set datamap property to specified value
• $GetData$(datamap prop name) <string>
  • parameter format: entity|input|default value
  • example: !activator|$DisplayTextCenter|def
  • Trigger the input of an entity, with datamap prop as a paramer (default value if not found)
• $SetProp$(send prop name)[$(array)] <string>
  • Set send property to specified value. Can also set arrays.
  • example without array: $SetProp$m_bInUpgradeZone
    • sets player state if player is visiting an upgrade station
  • example with array: $SetProp$m_iAmmo$3
    • sets player ammo type array to 3, which is metal carried
• $GetProp$(send prop name)[$(array)] <string>
  • parameter format: entity|input|default value
  • example: !activator|$DisplayTextCenter|def
  • Trigger the input of an entity, with send prop as a paramer (default value if not found)
• $SetClientProp$(send prop name)[$(array)] <string>
  • Set fake send prop value only seen by players. Can also set arrays. Useful for setting fake mission name or wave number, as $SetProp would trigger unwanted behavior
  • example without array: $SetClientProp$m_bInUpgradeZone
    • sets player state if player is visiting an upgrade station
  • example with array: $SetClientProp$m_iAmmo$3
    • sets player ammo type array to 3, which is metal carried
• $ResetClientProp$(send prop name)[$(array)]
  • Reset fake prop value set by $SetClientProp
• $AddModule <string>
  • Add entity module by name
• $RemoveModule <string>
  • Remove entity module by name
• $SetCollisionFilter <entity>
  • Sets custom collision filter entity. If the filter passes, the entity collides as usual, otherwise the colliding entities pass through
• $HideTo <player>
  • Hides this entity to specific player
• $ShowTo <player>
  • Shows previously hidden entity to specific player
• $HideToAll
  • Hides this entity to all players by default
• $ShowToAll
  • Shows previously hidden entity to all players

Outputs

• $OnUser5-8 <string>
  • Called when $FireUser5-8 input is used
• $OnKilled
  • Fired when the entity is killed (removed from the world). The calling entity no longer exist and cannot be accessed unless input delay is set to -1
• $OnDamageReceived <int>
  • Fired when the entity is damaged. Parameter is the damage received by the entity. !activator is the damage inflictor
• $OnDamageBlocked <int>
  • Fired when damage was blocked by the entity. Parameter is the amount of damage blocked by the entity. !activator is the damage inflictor
• $OnDeath <int>
  • Fired when the entity died. Parameter is the damage of the fatal blow. !activator is the damage inflictor